XEVOX Bewegungsmelder PET

• Ein PIR-Element
• Erkennt den Unterschied zwischen Mensch und Tier
• Ein Hund bis 30kg löst keinen Alarm aus
• Detektionsbereich: 12 x 12m
• Öffnungswinkel: 90°, ideal für Eckmontage

Technische Daten:

Montage:
Wand

Detektionsverfahren:
PIR

Detektionsbereich (m):
12 x 12

Alarmspeicher:


Tierimmun:
ja bis 30 kg

Stromaufnahme:
9 mA

Spannungsversorgung:
9 - 16 V

Alarmkontakt:
NC, 50 mA, 24 VDC

Sabotagekontakt:
NC, 100 mA, 24 VDC

Temperaturbereich:
- 10 bis 55 °C

Xevox Pet Motion Detector - BW8070
The Xevox Pet is a motion sensor with one PIR sensor. It reacts to heat movement and reports it to the alarm centre. With this sensor, pets do not trigger an alarm. The Xevox Pet is an animal-immune motion sensor. That means that it can tell the difference between persons and small animals such as pets. Whereas persons moving in the room are reliably detected, the sensor ignores pets up to 30kg in its monitoring. The best place to install the equipment is in a corner, between 2.4 and 2.7 metres above the floor. The intruder's possible direction of movement should be at right-angles to the sensor. Unsuitable for installation are all places opposite to sources of heat (e.g.: heating) or a window (sunshine). Do not install the motion sensor near to electric cables, gas lines or electronic equipment that generates heat during long periods of operation. The viewing angle of Xevox Pet motion sensors is 90 degrees, and the detection range - depending on installation height - up to 12 x 12 metres. You can vary their sensitivity by means of a jumper. In this way, you can define the number of pulses that have to be detected before the sensor opens the alarm relay.

• One PIR element
• Detects the difference between persons and animals
• A dog under 30kg does not trigger an alarm
• Detection range: 12 x 12m
• Aperture angle: 90°, ideal for corner mounting

Technical Data:

Installation:
Wall

Detection method:
PIR

Detection range (m):
12 x 12

Alarm memory:


Immune to animals:
Yes, up to 30 kg

Power consumption:
9 mA

Voltage supply:
9 -16 V

Alarm contact:
NC, 50 mA, 24 V DC

Tamper contact:
NC, 100 mA, 24 V DC

Temperature range:
-10° to 55 °C