OptiSmoke - Optischer Rauchmelder

• Zum Anschluss an Alarmanlagen
• Detektiert sichtbare Rauchpartikel
• Selbstjustierend
• Potenzialfrei

Technische Daten:

Meldertyp:
optischer Rauchmelder

Alarmkontakt:
NO oder NC, 1A @30VDC

Anschluss:
NC + 12V Betriebsspannung

Betriebsspannung:
10,5 - 13,8VDC

Stromaufnahme, StandBy:
90?A

Stromaufnahme, Alarm:
35mA

Start-Zeit:
60s

Start-Stromaufnahme:
160?A

Reset-Spannung:
< 1V

Reset-Zeit:
< 1s

Betriebstemperatur:
-10 bis 50°C

Luftfeuchtigkeit:
0 - 95%, nicht kondensierend

Abmessungen (H x Ø):
46 x 100 mm

Gewicht:
130g

Optical Smoke Detector 12V - RM1000
The optical smoke detector reacts to visible smoke particles. If too much smoke enters its measuring chamber, an alarm is triggered. In the measuring chamber, an integrated infrared light source generates a light pulse every 8 seconds. Smoke particles from a fire change the light signal received by the light diode. A relay trips and the alarm centre reports a fire alarm. The optical smoke detector is mounted on the ceiling in the centre of the room. The minimum distance to the side wall should be 30cm. We recommend a separate smoke detector for each entrance area, staircase, living-room and bedroom. By changing a jumper, you can configure the optical smoke detector as NO or as NC detector. It is therefore suitable for every wired alarm system. The smoke detector is supplied externally with 12V operating voltage and is EN54 certified.

• For connecting to alarm systems
• Detects visible smoke particles
• Self-adjusting
• Potential-free

Technical Data:

Detector type:
Optical smoke detector

Alarm contact:
NO or NC, 1A at 30V DC

Connection:
4 cables

Operating voltage:
10.5 - 13.8V DC

Standby power consumption:
90?A

Alarm power consumption:
35mA

Start time:
60s

Start power consumption:
160?A

Reset voltage:


Reset time:


Ambient operating temperature:
-10 to 50°C

Ambient operating humidity:
0-95% non-condensing

Dimensions (H x Ø):
46 x 100 mm

Weight:
130g